Sandsuby Posted July 16, 2005 Share Posted July 16, 2005 I am new here but not to Subaru. I have been running a 97' twin turbo EJ20 with a manual shifted 4EAT auto tranny in a mid-engine street legal sand rail for three years. I am working on installing MegaSquirtnSpark on another EJ20G for another future sand rail. I am not sure what way to go with the MegaSquirt. I would like to keep the coil on plugs but it may be hard to do with EDIS. Any one here doing some thing along this route. BTW if anyone wants info on shifting a 4EAT full manual without the TCU let me know. Sandsuby Quote Link to comment Share on other sites More sharing options...
WoodsWagon Posted July 18, 2005 Share Posted July 18, 2005 sounds like a really nice setup. migt as well just post the guide to TCU free shifting in the Repair manual section of the board. It link is in the top bar. Quote Link to comment Share on other sites More sharing options...
Sweet82 Posted August 2, 2005 Share Posted August 2, 2005 I'm thinkin PICS! Show us your work, there is only a handfull of buggies out there. We wanna see yours... Welcome to the board, Glenn 82 SubaruHummer 01 Forester Quote Link to comment Share on other sites More sharing options...
Brumby Boy Posted August 3, 2005 Share Posted August 3, 2005 I agree one decient pic is worth 1000 words. a number of pics, well imagine Quote Link to comment Share on other sites More sharing options...
oddcomp Posted August 3, 2005 Share Posted August 3, 2005 you mean a setup like this with the megasquirt and edis running??? www.oddcomp.com/topshot.jpg.JPG there is a ea82 single turbo hiding under all that .. stuff and goin coil on plug with edis should work fine other people are doing it on other motors just rewire the c.o.p's to fire off the coil pack leads from the edis module i will look into it a bit more to figure out the way to do it yeah yeah i know i screwed up the file name .. oh well lol Quote Link to comment Share on other sites More sharing options...
WAWalker Posted August 4, 2005 Share Posted August 4, 2005 I am new here but not to Subaru. I have been running a 97' twin turbo EJ20 with a manual shifted 4EAT auto tranny in a mid-engine street legal sand rail for three years. I am working on installing MegaSquirtnSpark on another EJ20G for another future sand rail. I am not sure what way to go with the MegaSquirt. I would like to keep the coil on plugs but it may be hard to do with EDIS. Any one here doing some thing along this route. BTW if anyone wants info on shifting a 4EAT full manual without the TCU let me know. Sandsuby Of course we want to know how to make a 4EAT full manual! Quote Link to comment Share on other sites More sharing options...
Sandsuby Posted August 7, 2005 Author Share Posted August 7, 2005 I'm thinkin PICS! Show us your work, there is only a handfull of buggies out there. We wanna see yours... Welcome to the board, Glenn 82 SubaruHummer 01 Forester I don't know how to post pics or am not allowed. Quote Link to comment Share on other sites More sharing options...
Sandsuby Posted August 7, 2005 Author Share Posted August 7, 2005 Of course we want to know how to make a 4EAT full manual! I could copy and paste info but there is a diagram included in the file and I am noy allowed to post attachments. PM me your email and I will send the information to you. Don Quote Link to comment Share on other sites More sharing options...
Sandsuby Posted August 7, 2005 Author Share Posted August 7, 2005 you mean a setup like this with the megasquirt and edis running??? www.oddcomp.com/topshot.jpg.JPG there is a ea82 single turbo hiding under all that .. stuff and goin coil on plug with edis should work fine other people are doing it on other motors just rewire the c.o.p's to fire off the coil pack leads from the edis module i will look into it a bit more to figure out the way to do it yeah yeah i know i screwed up the file name .. oh well lol[/quote I was hoping to see what others have done with the EJxx engines. It seems the EDIS modual is output load sensitive but I plan to try just that. The real advance for us subie folk would be if some one with code experence could make the six tooth EJxx crank wheel to work. Don Quote Link to comment Share on other sites More sharing options...
felipe01forester Posted August 8, 2005 Share Posted August 8, 2005 I don't know how to post pics or am not allowed. If you want to post a pic, you have to upload it onto the member's photo gallery, then type in "". It should show up on your post. Quote Link to comment Share on other sites More sharing options...
Sandsuby Posted August 8, 2005 Author Share Posted August 8, 2005 First photo try. Quote Link to comment Share on other sites More sharing options...
Sandsuby Posted August 8, 2005 Author Share Posted August 8, 2005 Another try. http://www.ultimatesubaru.org/photos/showphoto.php?photo=7410 The photo did not show up here but you can click on the link. I fill my quota in the Photo Gallery enjoy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.