Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
ATF flow direction thru cooler: does it matter?
Posted 03 October 2009 - 06:28 PM
Posted 03 October 2009 - 06:30 PM
The hard line bolted along the frame rail that points straight up is the top hose-the feed line. The other is the return.
Posted 03 October 2009 - 08:26 PM
Posted 03 October 2009 - 09:55 PM
Hmm... Well, the Baja (what I have), like the newer Legacys, doesn't have a 'top' and 'bottom.' Both ATF lines are in the bottom radiator tank, and there's a left and right. The hard lines along the frame rail from the tranny are also both pointing nearly-straight down. There's a forward one and a rear one.
Its not a cross flow radiator?
It doesnt matter when your removing your external cooler, but it does when you add it. You want to cool the fluid before it goes in the radiator, as it also helps to heat up the tranny fluid. Putting it in after the radiator can cause the tranny to take longer to warm up.
Posted 03 October 2009 - 10:44 PM
Anyway, if the flow direction doesn't matter, then I'll just un-hook and re-hook. I'm not going to use them both, just the factory one. Don't need the aftermarket any more.
My ATF cooler (stock one) is a cross-flow, though I must not have phrased myself very well. I meant to say that the factory input and output are on opposite sides of the lower tank on the coolant radiator. So, the ATF inside flows across the tank, just as you say. Sorry if I was unclear before, and thanks for the help.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users