Jump to content
Ultimate Subaru Message Board

Engine help


Recommended Posts

I just bought MY 85 gl hatch and want to restore it best I can.It was the first car I bought and paid for.lots of memories in that car.well I REBUILT THE CARB,hatachi,new plugs wires,disributor,button,both fuel filters,and coil.when the engine warms up to temp the idle will fluctuate between 800-1500.also put new intake gaskets on,pcv valve,and removed and cleaned egr valve.can't locate any more leaks.any help would be appreciated.

Link to comment
Share on other sites

Cool, another Virginian.

Are the throttle shaft bores worn? Can you take the throttle shaft and move it back and forth, up and down? If you can, the throttle plates will never be right. Time for a new carb. You can check this by spraying carb cleaner or starting fluid right at the throttle shaft, while wiggling it. It basically causes a big, variable vacuum leak that is hard to track down.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...