wallaceg Posted October 19, 2009 Share Posted October 19, 2009 After replacing the HVAC control bulbs the fresh/recycled air damper switch is stuck in the fresh position. Not a big deal since I hardly ever use recycled air but I'd like to fix it anyway. Things look OK on the switch end but I can't track the cable back to the damper end. Where is the damper located? Hidden behind some panel? Car is a 97 Impreza L wagon. Thanks! Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted October 20, 2009 Share Posted October 20, 2009 The fresh air door is behind the glove box. If you remove the glovebox you should be able to see the door and the cable. Quote Link to comment Share on other sites More sharing options...
wallaceg Posted October 20, 2009 Author Share Posted October 20, 2009 (edited) I removed the glove compartment with the two screws on the hinges and then took off the panel behind it. This exposed the fresh air door mechanism and I was able to quickly reattach the cable to the actuator. Thanks again! Edited October 21, 2009 by wallaceg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.