Jump to content
Ultimate Subaru Message Board

Recommended Posts

It depends.

 

If topping off the coolant use the appropriate mix of distilled water and anti-freeze.

 

When changing the coolant, after flushing the system with distilled water, empty out as much of the water as possible, close the drain, then add anti-freeze to make the desired mixture based on the system capacity, then top off with distilled water. For example, if your system capacity is 4 gallons you would add 2 gallons of anti-freeze and then top off with distilled water to make a 50:50 mix. Sometimes removing the lower radiator hose is necessary to get enough water out after flushing to add the necessary amount of anti-freeze.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...