Jump to content
Ultimate Subaru Message Board

mazda rotery engine transplant, is it possable?


hotrod_sol
 Share

Recommended Posts

does any one have any ideas on putting a rotary engine in an 80's subaru wagon?or in my case, a 70's brat. i think it would make the ultimate power plant.:banana: i can find one example on the net, but he had to cast his own bell housing or something. how about a lift kit, rotary engine and it's trany. datson transfer case, and a rear dif up in the front replacing the trans-axle. think it would work?

Link to comment
Share on other sites

Almost any transplant from one mfg to another requires having an adapter plade made.

 

The Rotary would be a neat fit. But rotarys are oil burners and pigs when it comes to fuel. What is redline on a rotary, that would be my one concern, if the tranny (that is elderly) can deal with that high an RPM.

 

 

nipper

Link to comment
Share on other sites

"But rotarys are oil burners and pigs when it comes to fuel"

 

You can have carb or EFI. The RX 4, 13B 1308 cc came with a 465 cfm spread bore Hitachi 4 Bore Carb. If I have that right, and I'm not sure I do. That's a big carb.

Edited by Quidam
Link to comment
Share on other sites

If you can do a rotary try and get a Renesis to work. They are found in the new rx-8's and have a 3rd oil injector in the middle to help the life of apex seals last a bit longer. And the new ones are almost much more reliable. I had my RX-8 for about a year and put over 20k miles on it and never once had ANY issues of flooding. They have them tuned for reliability very nicely compared to the first and second gen 7's.

Link to comment
Share on other sites

I have had this thought more than a few times bounce around in my head. I like the idea of using the rotary and its mated 5speed, hookin that up to a t-case, subframe etc. I think the mechanical and fab really wouldn't be all too difficult and the power to weight ratio is nice. Even the size of the rotary is appealing, I think it'd probly fit under the hood of a soob. With the amount of rpm spinnin through the gearbox/t-case I'm not sure how well a pair of r160s would hold up. Might as well straight axle it.... Then what's really left that's actually Subaru???? A fuel tank and radiator, maybe? I dunno don't get me wrong it seems like a cool thing to do but I'm kind of a purist I guess. Course I'm kinda biased toward Subaru too because I think a bug with any subie transplant is way cool but a subie with any other powerplant seems unfair to the car in my opinion. Guess Im a little weird! On another note about rotarys, I have a buddy whose runnin one in an old luv that he straight axled and is runnin Dana 44's ***/r Mazda 5 speed mated to an np205(I think?). Bottom line is this thing rips it up! It's been rolled like 5 times and jumped repeatedly something like 8-10 feet in the air. Sorry I'm gettin sidetracked. I was lookin under his hood and I noticed a huge sidedraft weber with velocity stacks and NO air filter whatsoever?! He told me he got sick of the thing boggin out when the filters got wet and the thing spins such high rpm that it sucks dirt/water thru the engine so fast that it rus better no filter. I was like "ok dude!" but the thing just keeps on goin an goin. One last little thing about the rotarys is the oil filter setup, most practical automotive engineering I've ever seen, easy to get to and not a drop spilled anywhere.ever. That's all, thanks for reading!

 

Spencer

Link to comment
Share on other sites

According to a few mechanics and machinists I've talked to, they don't last down here in the Arizona heat. Most of the daily driven rx-7s last about a year before the seals go and you really can't push them because they have worse cooling problems than the ea82. :eek:

Besides, it's a torqueless wonder.:lol:

Link to comment
Share on other sites

  • 11 months later...
There was a guy who put a rotary into an RX a while back, I think he ran the piss outa it and then it sat down in Florida for a long time, it was for sale not too long ago. It was a Black RX...

 

-Bill

 

You can see Pics and a Link about that Black Rotary RX on Post Nº 914 of This Thread:

 

http://ultimatesubaru.org/forum/showthread.php?t=53434&page=92

 

Kind Regards.

Link to comment
Share on other sites

Some west coast company (Kenny or something like that) years ago actually manufactured an adapter for the rotary/subaru combination. I even saw one on ebay maybe 8 years ago for sale. That company I think is the same one that still manufactures kits to install Subaru engines in VWs.

 

Kennedy Engineering or KEP.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...