subiemech85 Posted February 11, 2004 Share Posted February 11, 2004 20 X 1.5 is the size Quote Link to comment Share on other sites More sharing options...
ShawnW Posted February 11, 2004 Share Posted February 11, 2004 One on ebay: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2455903484 Not cheap! Quote Link to comment Share on other sites More sharing options...
The Scooby Posted February 11, 2004 Share Posted February 11, 2004 uhh, can you say a freaking rip off. all you do is get a standard oil plug, and drill a whole in the middle, then insert a magnet, or just apoxy one to the top of the plug, screw taht, waht a waste of cash. Quote Link to comment Share on other sites More sharing options...
Subarutex Posted February 11, 2004 Share Posted February 11, 2004 uhhh guys... its only $20 shipped to your door. Not as cheap as a normal one... but it has a freakin magnet in it! Also, I wouldn't trust hand making one of these... i'd just love to have that magnet come off and find a way somewhere it shouldn't be. Quote Link to comment Share on other sites More sharing options...
The Scooby Posted February 11, 2004 Share Posted February 11, 2004 Originally posted by Subarutex uhhh guys... its only $20 shipped to your door. Not as cheap as a normal one... but it has a freakin magnet in it! Also, I wouldn't trust hand making one of these... i'd just love to have that magnet come off and find a way somewhere it shouldn't be. incorrect, if it where to come off, it would stick to your oil pan, and woopide doo. by the way i sent you a PM subaruTex and have been waitin for a reply for quite a while. Shean Quote Link to comment Share on other sites More sharing options...
Subarutex Posted February 11, 2004 Share Posted February 11, 2004 Perhaps if your PM box wasn't full I would have replied in a timely manner. Anyways... Andy had car trouble that weekend... so I ended up getting no parts. Quote Link to comment Share on other sites More sharing options...
Alexx Posted February 11, 2004 Share Posted February 11, 2004 That magnet design is different than the one in my subaru. Quote Link to comment Share on other sites More sharing options...
sub87dl Posted February 12, 2004 Share Posted February 12, 2004 Originally posted by Subarutex uhhh guys... its only $20 shipped to your door. Not as cheap as a normal one... but it has a freakin magnet in it! not to go off-thread here, but that's the spirit of what i love about this board and interest: it doesn't cost an arm and a leg to buy in! this board has a pride in diy, and keeping things inexpensive and reasonable, which I really appreciate. old subes are a hobby, an interest, an activity, and a passion that you don't have to spend a lot on, and i even think that it could be considered bad form if you did. btw, epoxy should hold against the heat. my brother epoxied the coolant overflow pipe back to the filler neck. it held against the heat, but was never pressure proof (different issue). Luke Quote Link to comment Share on other sites More sharing options...
baccaruda Posted February 12, 2004 Share Posted February 12, 2004 I recommend a fumoto oil drain valve and an oil filter magnet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.