jimmyberka Posted February 11, 2004 Share Posted February 11, 2004 I'm replacing head gaskets on my '90 Legacy Wagon. I notice the part # for the new ones ends in # 114. The ones I took off are part # 110. Any way of knowing if the ones I took off are origional? Also There is no record of any work having been done on the internal eng. or heads, but I can still see cross-hatching down the piston walls from what looks like a recent cyl. honing. Wouldn't this cross hatching wear away fairly quickly ? Quote Link to comment Share on other sites More sharing options...
svxpert Posted February 12, 2004 Share Posted February 12, 2004 the correct part number for your application is: 11044AA114 your old part number might have been superceeded Quote Link to comment Share on other sites More sharing options...
Commuter Posted February 12, 2004 Share Posted February 12, 2004 I saw my engine apart at 160k miles and the cross-hatch cylinder honing was still very evident. It does not 'wear away'. Well, at least not quickly. Commuter Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.