Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Quick rust 'cover up' with flashing?
Posted 29 July 2010 - 08:34 AM
I remember years ago in high school my friend bought aluminum roof flashing the width of the bottom part of his rocker panels, and then cut it to length and riveted over the rusty area, then spray painted it to match his car. From a distance the repair looked great. Up close I mean it looked a little weird, what with all those rivets there and such, but it sure looked better than just leaving it rusty, and it seemed a lot quicker/easier to do than trying to bondo it.
Does anyone have experience/suggestions on this kind of 'cover up'? Thank you.
Posted 29 July 2010 - 09:49 AM
I have rebuilt door sills and rockers with aluminum roof skins from u-haul trucks. Personally, i like rivets and sheet metal vs sloppy bondo.
You can make a panel that futs just under the door trim and wrap it around the seam of the door and pop a rivet all the way through.
It would probably bebest to drill and pop your first rivet before drilling the rest of the holes. Pop your rivets as if it were a torque sequence, as the sheet metal can buckle and be wavy if you move too quickly or in the wrong order. work from the center out.
here are some examples of the work i have done:
Posted 29 July 2010 - 10:06 AM
Now that I think about it, my dad did something like that with the aluminum on an old Cadillac when I was a kid. He got old printing plates from the newspaper for free and used those for material. I think it was aluminum or some thin steel.
I really like your tip about wrapping the aluminum around the door panel and then riveting all the way through. That is going to be cleaner than trying to trim it to fit the outside. I just wasn't sure if there would be enough clearance for the door to still close right, but the aluminum is pretty thin so it shouldn't be a problem I would guess.
I'll have to see what materials I can find since I see the aluminum roof flashing has gone up in price quite a bit from what I remember from years back.
Edited by porcupine73, 29 July 2010 - 10:08 AM.
Posted 29 July 2010 - 10:11 AM
Posted 29 July 2010 - 10:19 AM
I used a pneumatic riveter. the one at u-haul was actually the harbor freight model (blue-grey hammered color). I used 3/16 x 1/2 and 3/4 rivets and 3/16 drill bit.
You might be able to buy rivets by the box at the u-haul if you ask the manager or the hitch guy. Although its not a normal sales item, they have the ability to sell it for retail if the manger choses to do so.
I would otherwise suggest semi trailer repair shops or rv shops for rivets if you cannot source a supplier.
go HF for the tool, but better for the rivets themselves.
Use aluminum since it is softer and hammerable. steel flashing can rip the holes out while drilling, and will tear if its too thin. the material i used was rather thick for sheeting, the flashing stuff at home depot will be much thinner for tight clearance.
Posted 29 July 2010 - 10:24 AM
I know HF has that riveter on sale all the time, plus in lots of magazines they are running 20% off any item coupons, I know I've seen the coupon in Guns&Ammo and Motorcyclist in the last couple months.
I don't mind the rust holes too much but I was getting some flack at work for parking this 'rust bucket'. And wasps have been crawling up in the doors in the summer too.
Posted 29 July 2010 - 10:46 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users