The fun thing working on Justys is that everything is so small compared to other cars. I am just in the starting point of tearing down the engine and trans. The problem is that my engine stand that is rated for dealing with a Hemi is a little to big to hold such a small engine.
I was wondering if anybody has seen a factory engine workstand for the Justy? I have the part numbers for these creatures, 498455400 (attachment), and 499815500 (engine stand). This stand would be cool because is would sit on your workbench. The engine only weighs about 130 pounds fully assembled so it's not that hard to move around.
The trans stands (4wd) have part numbers are 49935500, 499295600, and 499935400. These will not be all that hard to reproduce. I am more worried about the engine stand.
Does anybody out there have any leads on these items? Any help in finding these items would be greatly appreciated.
Matthew
Welcome to Ultimate Subaru Message Board, my lurker friend!
 |
Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created. We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning ** Not an actual guarantee, but seriously, you probably won't regret it! Serving the Subaru Community since May 18th, 1998! |
Guest Message by DevFuse
Engine and Trans Stands
Started by
malamute
, Feb 22 2004 09:42 PM
1 reply to this topic
#2
texasjack
-
- Members
-
- 41 posts
USMB Regular
- Aledo, TEXAS
Posted 18 January 2013 - 11:47 PM
Take two saw horses and a 4x4 sheet of plywood or sheating, clamp the wood to the saw horses with 2 or 4 c clamps.
you now have a great assembly, sit your but on a stool and work away.
When you are finished take the table down.
I assembled a 1.6 engine this way and it beats standing for an OLD man.
Jack
you now have a great assembly, sit your but on a stool and work away.
When you are finished take the table down.
I assembled a 1.6 engine this way and it beats standing for an OLD man.
Jack
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
