carfreak85 Posted February 29, 2004 Share Posted February 29, 2004 Need parts to bring an engine back up to snuff. Anyone know where to get replacement parts or a website that shows parts interchangability? Quote Link to comment Share on other sites More sharing options...
Dr. RX Posted February 29, 2004 Share Posted February 29, 2004 You might start where you got the engine from. Quote Link to comment Share on other sites More sharing options...
carfreak85 Posted February 29, 2004 Author Share Posted February 29, 2004 Alright then I will. A few of the hoses (Metal ones) have rust and gunk in them and I think Im gonna replace them. Also the MAF to turbo pipe is cracked and Im going to need that too. Belts I figure I can get from NAPA or something. How should I clean out the PS resivior, the replacement you gave me has crud in it and the little filter was askew and I don't want to take any chances. BTW, did you pull that intake manifold yet? I've almost got mine off but I basically had to rip everything off the engine! Never knew it took so much to refurbish/ clean the OUTSIDE of an engine! When do you expect to get that wiring info? Thanks for your help Corky! Quote Link to comment Share on other sites More sharing options...
Dr. RX Posted February 29, 2004 Share Posted February 29, 2004 About 90% of all those things are the same as the Legacy Turbo. I think I have another MAF to trubo pipe I'll give it to you when I give you the good manifold. You flush the PS tank with any parts cleaners. You got to remember, those engine came here in a container after the Pacific Ocean, if the container wis near the top, it got a lot sea spray, and that salt is what caused the oxidation on the engine. I should have the wiring info in about two weeks. Man, you've got to be patient. Quote Link to comment Share on other sites More sharing options...
carfreak85 Posted March 1, 2004 Author Share Posted March 1, 2004 Corky will this work? Quote Link to comment Share on other sites More sharing options...
Dr. RX Posted March 1, 2004 Share Posted March 1, 2004 Yep. Quote Link to comment Share on other sites More sharing options...
carfreak85 Posted March 1, 2004 Author Share Posted March 1, 2004 Hows it going removing the intake manifold? I have had to disconnect so many things to free it from the wiring and vacuum hoses! Quote Link to comment Share on other sites More sharing options...
Dr. RX Posted March 2, 2004 Share Posted March 2, 2004 How soon are you going to be putting the engine into a car?? Quote Link to comment Share on other sites More sharing options...
carfreak85 Posted March 2, 2004 Author Share Posted March 2, 2004 Im working on it and want to get everything squared away so when I get a shell, I can work on that and have the engine done! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.