Jump to content
Ultimate Subaru Message Board

EA82 Vacumn Line Sizes


Recommended Posts

I think most of the fittings work with 5/16 line. I just used a short plugged piece of vacuum line instead of a plug or cap at each spot. I used new line because all the stuff on the car had become too brittle. It also let me re-do the vacuum advance line for the disty (makes a pleasant difference).

Link to comment
Share on other sites

shean

 

I went and bought some pvc end caps (3/4") and then wrapped a lil bit of black tape around the hoses and then threaded the caps on to the end of the hoses for the AIS system (the "exhaust recirc" deal you were talkin about)

 

I bought some caps tonite. Theres some parts on the carb that have hoses but I wasnt sure what the were so I didnt cap them off. can u take a picture of the top of your carb and the front and back views of it for me? Then I can circle the hoses that I didnt take off and see if you did (compare the two carbs)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...