85wagon Posted March 8, 2011 Share Posted March 8, 2011 i was wondering about a radius arm mod? i guess it helps gain positive caster, i was wondering if anyone had done this and what type of vehicle you had taken the radius arm out of. any ideas? http://offroadingsubarus.com/83sedan_radiusrods.html is where i saw this mod but i cant get ahold of a 81 Toyota Crown radius arm. thanks for any ideas Quote Link to comment Share on other sites More sharing options...
monstaru Posted March 8, 2011 Share Posted March 8, 2011 cut yours in half, sleeve, weld. good.cheers, b Quote Link to comment Share on other sites More sharing options...
85wagon Posted March 8, 2011 Author Share Posted March 8, 2011 lol thats easy enough, ill give it a try, thanks for the idea Quote Link to comment Share on other sites More sharing options...
Caboobaroo Posted March 9, 2011 Share Posted March 9, 2011 Speciality Products Company in Longmont, Colorado have adjustable radius ruds for under $100 IIRC. Bolt in and go. I have a set of those and a set of custom made radius rods that I did myself. No pics but its nothing real special. One thing to keep in mind is when you add caster to these cars, it'll start to bind the bushing in the lower control arm and will tear/prematurely wear out and then you'll have another issue to deal with. I have a few ideas for custom control arms but I'm not ready to give out my ideas until I get something built this summer:banana: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.