dssenne Posted October 1, 2011 Share Posted October 1, 2011 I recently posted about my shift selector lever locking up on me ('92 w/auto. trans.). Today I pulled the console covers to see if the solenoid was gummed up (it seemed fine- not dirty at all). Now when the selector is out of P, I can move it to the other positions without pressing the grip button. The only exception is that the button has to be pressed to go from N to R. I did loosen the selector lever (two screws on side) so I could lift the indicator cover up a bit to see the solenoid better. When I did this the grip button came out. But I thought I got it back together correctly. I know this is a stupid question, but the grip button needs to be pressed in order to be able to move the selector from say, D to N or 3,2,1 doesn't it? I never really tried to do so without pressing it, so I don't know if I screwed it up! If I did, any suggestions about what to do? I REALLY need to get it back together today! Thanks Quote Link to comment Share on other sites More sharing options...
dssenne Posted October 1, 2011 Author Share Posted October 1, 2011 When in doubt read the manual. Sorry for the lame post. Don't ban me for being an idiot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.