frank a Posted July 22, 2012 Share Posted July 22, 2012 I bought a used adapter for a ej22 and can not get the flexplate hub to pull up tight on the crankshaft. There is a1/6 gap and will not pull up tight. Any ideas on want is wrong or how to slove this? Quote Link to comment Share on other sites More sharing options...
maozebong Posted July 23, 2012 Share Posted July 23, 2012 i would call kennedy. chances are, they know the most about their own product.... Quote Link to comment Share on other sites More sharing options...
frank a Posted July 23, 2012 Author Share Posted July 23, 2012 called kenndy and really could not tell me what to do was hoping someone who has installed one could help, Quote Link to comment Share on other sites More sharing options...
frank a Posted July 23, 2012 Author Share Posted July 23, 2012 Ok figured it out. This was a used adapter and there was two half inch washers droped in the hole and that was holding the hub off the crank flange. The washers fit tight and looked like they where part of the hub. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.