Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
what am I missing
Posted 02 April 2004 - 03:57 PM
Posted 02 April 2004 - 04:15 PM
good luck, John
Posted 02 April 2004 - 08:21 PM
Posted 03 April 2004 - 01:06 AM
With mine (manual), I removed the bolts/nuts that join the engine to the bellhousing but still had to carefully use a prybar to seperate them both.
I jacked up the transmission a little to put it on an angle but I found it was the engine mounts that stopped me pulling the engine further away from the tranny. I couldn't lift the engine/trans assembly high enough so the mount-to-crossmember bolt would clear the hole in the crossmember.
I had to unbolt the engine mounts from the engine and then it came away easily.
When dropping the engine back in, sit the mounts on the crossmember and loosely install the nut. Then lower the engine back in and align up the mounts as you go.
Posted 03 April 2004 - 04:55 AM
Posted 03 April 2004 - 10:35 AM
Posted 03 April 2004 - 02:59 PM
Otherwise, carefully use a prybar with some rags/wood to seperate them.
Posted 04 April 2004 - 11:56 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users