the sucker king Posted November 22, 2012 Share Posted November 22, 2012 on a gen 2 hatch, the rubber around the rear hatch glass Quote Link to comment Share on other sites More sharing options...
skishop69 Posted November 22, 2012 Share Posted November 22, 2012 Depends on if it's still soft and flexible. If not, good luck. Spray some soapy water on the inside and start at the middle of one of the sides. Using a couple of large screw drivers, pry the rubber outwards (from the inside) off the frame and keep working around the rubber and spraying. You'll need a special pliable sealant when putting it back in or it will most likely leak. Can't remember what it's called though. A glass shop can tell you. Quote Link to comment Share on other sites More sharing options...
ShawnW Posted November 24, 2012 Share Posted November 24, 2012 Its in your FSM if you have a few minutes look in there. You will need a 2nd person. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.