nutt7 Posted April 14, 2004 Share Posted April 14, 2004 I was searching for mandrel bent tubing for a custom turbo-back exhaust I would like to build and found a few good sites. This first one has stainless, carbon steel, and aluminum...http://www.promical.com...they also have couplers and reducers and GLAVEN! This next one is a DSM site, serious stuff here! http://http://www.roadraceengineering.com/mandrelbends.htm and another...http://www.exhaustdepot.net/manben2to5.html Hope this helps some people! BTW...I know this q has been asked and argued, but I am debating 2.5" or 3"... my goal is a free breathing EA82t with an IC, OC, and 12 or 14psi, and eventually a more efficient turbo (ignition and fuel delivery taken into consideration, among others to support this goal) any suggestions/facts/opinions? thanks, eric Quote Link to comment Share on other sites More sharing options...
garner Posted April 14, 2004 Share Posted April 14, 2004 Thanks Nutt, excellent links I looked everywhere for mandrel bent tubing but never found these sites. Quote Link to comment Share on other sites More sharing options...
bigjim5551212 Posted April 14, 2004 Share Posted April 14, 2004 If you go to a business that sells equipment for farm milking machines, you will find stainless bends and tubing. Thats where my buddy buys stuff... Quote Link to comment Share on other sites More sharing options...
lastchance Posted April 14, 2004 Share Posted April 14, 2004 Dude...I've given this site out once or twice, but I'll do it again for the noobs... If you are looking for some serious mandrel bends, including SUPER SUPER tight radius 90 degree bends....Check out these guys www.woolfaircraft.com Maybe we can get some kinda group buy going with them...What do ya think??? Later, Dan Quote Link to comment Share on other sites More sharing options...
lastchance Posted April 14, 2004 Share Posted April 14, 2004 In addition to my last post...Check out the sizes and the centerline radius...Serious, this should make you guys cry with happiness!!!!! Quote Link to comment Share on other sites More sharing options...
rallyruss Posted April 14, 2004 Share Posted April 14, 2004 those are some good sources. I will need it when I design a new larger turbo system. there are also sources like summit, jegs, and JC whitney. Quote Link to comment Share on other sites More sharing options...
nutt7 Posted April 15, 2004 Author Share Posted April 15, 2004 i would be down for group buy...boosted84...wanna contact them and check if they are down? anyone else interested? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.