New kill switch and alt the 02 outback alt had the abillty to self energise with no wires hooked up so kill switch whould not work so downgrade to 96 outback alt and two pole master switch and fixed whent from charging at 15.5 to 14.20 and way less load on engine thiss should help out my electronics. Also changes the nos extra feul pump from 9 psi pump to a 40 psi pump the 9psi pump was geting overwhelmed by boost preshure and was not giving enuff feul. Now 0.28 jet feul 0.22 jet nos is small but safe zone
Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Its buggy time agian
Posted 28 June 2013 - 09:39 AM
Off to races will be back on tuesday going to go kick big block butt
Posted 28 June 2013 - 03:19 PM
Don't forget to bring us back a video, or it didn't happen.
Posted 02 July 2013 - 09:51 AM
well lets just say those boys were not to happy about geting beat last year ! they may have upgraded a bitt. Buggy was fast pulled 4 good times ran flawlesly we kept slowly turning up the nos by end of weekend we were running a 0.32 nos and 0.18 feul jets. The problem was feul preshure is fixed now and are math is lining up. Engine ran very strong and no broken axles during the race did break two on a lanch into the deep hole contest so i backed out and whent thru in reverse 2wd was a wild ride but whent thru. We have some vidio of it. Anyway the fastest time was a 5.17 with Matt driving in the mecanics pass. fastest time in the class is around 4.50 - 4.00 so we are still a wase off came in 4rth outa 4 but 6 passes and 2 deep hole passes and no broken pistons ! i'm shure we have pics but will take us abitt to get them on here you may find some on the NWMRA site
Posted 02 July 2013 - 02:59 PM
i shot about an hour of video over the weekend, so ya we will have some proof - i just have to get an adapter for my antique (2005) video camera cable. even got one 'in car' shot, with the miniDV cam taped to the back pillar, lol.
definitely a cool experience - kinda stressful for a first timer when the race was on, trying to figure out where to be at what time, not get in the way in the staging area, etc. the second day at least i had seen the routine, so it was easier to know wtf was going on.
no updates to the website as of today, but here's the link. we're in B class . http://www.nwmra.com/index.php
Posted 03 July 2013 - 09:45 AM
went over the buggy with a fine tooth comb couldent find any damge or problems from weekends race just the two broken rear axles and one torn cv boot on the front. The rest held up very well and the engine runs better now than when we started
Posted 07 July 2013 - 06:43 PM
Your link doesn't work....sounds like you had a fun time.
Posted 08 July 2013 - 09:54 AM
Sorry they are haveing site trubbles we are working on it and i lost matt for a week we are on it
Posted 11 July 2013 - 09:27 AM
So found a deal on nos parts have enuff jets to mutiport nos inject it now 30 hp per cly is are goal at 45 psi feul press. This should kick it in the butt or blow it up is a pile of plumbing but worth it. The season is a points game we get x amount of points for 4 compleated passes fastest passes ect so we had all four passes so got are points two trucks in class had one unfinished pass so they dont get there points for all compleated passes makes for a close points race at end of season and reliability is very important. Well unless you have a pile of engines on your shop floor.
Posted 12 July 2013 - 11:06 PM
hey the merritt paper put a clip of the crapinator on youtube , search "merritt mud drags 2013" on youtube for some vids... i'm waiting on my PCI firewire card to arrive, then i can put some up too.
too bad its the first pass where the engine bogs right at the start, lol
Edited by matts87glsedan, 12 July 2013 - 11:11 PM.
Posted 15 July 2013 - 10:07 AM
Of couse they cut it off buggers oh well some good shots of the other cars in my class the skiny white and flames chev is the fastest car in my class followed by the green jeep thing and the one i race the mud shark driven by my freind cody his pitt crew cheif is blind he tunes the car checks the plugs ect all without seeing they dug the shark outof retirement to let the son race after his dad lost his sight. Is a very good crew to compeate with. He came in second at merit I was happy to get beat by him good job cody !
Posted 18 July 2013 - 10:29 AM
off to qesnell for next race should be a good track fast and good mud now my front diff is fixxed and the awd is tighter should work good geting short on rear axles down to 3 extras anyone got any extra 79-84 gl rear axles i just need the shafts not cvs
Posted 22 July 2013 - 10:16 AM
First pass good second pass better 3rd pass BOOM !!! peices Thanks Matt for the blast sheild we used it up was very violent and at high rpms not shure what let go but is many holes in block. On the + side no broken axles and trans worked way better was starting from a dead stop in second gear on the first two the 3rd one was just to deep and over loaded the engine when i looked out front of buggy was 2ft of mud it was pushing with front end. Well back to last years engine at least its still runing
Posted 24 July 2013 - 09:40 AM
putt in last years engine still runs good little smokey but smooth
Posted 25 July 2013 - 10:31 AM
bent the crank 5 thow but can be repiared so will turn agian
Posted 28 July 2013 - 09:42 AM
Thanks Doug that helps having a very hard time to find performance subaru parts here i priced out the manley rod thru my supyler came out to almost 800$ call manley direct 415 $ wtf canaidian parts supplyers suck
Posted 28 July 2013 - 11:07 AM
For reference here a new set of STI/WRX rods are $250.00.
Posted 29 July 2013 - 09:12 AM
Cheaper for me to get somone down there to buy them and ship them up to me somdays its hard to live in the middle of nowere and only having 2 parts supplyers sucks is gillbert or lordco and thats it and nether deals with hp parts
Posted 29 July 2013 - 09:22 AM
just have them shipped to a Washington member and drive down and get them
im a little south in ravensdale
Edited by apintonut, 29 July 2013 - 09:23 AM.
Posted 29 July 2013 - 09:27 AM
Thats not a bad idea or find a member who wants somthing that can trade or whos coming to get parts anyway I dont think they will let Ivan the teribble axross the border to easy
Posted 30 July 2013 - 09:29 AM
found them manley H beams good for 600hp at almost a $ per hp but on there way
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users