heres that timer relay 'pinout'
Jump to content
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Posted 01 August 2013 - 09:49 AM
Thanks matt we are installing a 5 second time limit realy on nos sestem to prevent to long of nos burn any longer than 7 seconds and toast !
Posted 01 August 2013 - 09:50 AM
Oh and good news i thoght i had only a 194 ft pass but turns out that i broke the beam so 3 compleate passes go figure engine broke 2 ft past the finish line but gives me my points for the year end nice
Posted 02 August 2013 - 10:28 AM
Posted 06 August 2013 - 10:45 AM
And so 2 good passes but broke a rod thru the block coming out of pitt on 2nd run seized it solid so we spent a hour turning it back and fourth till it broke loose had a 3/6 hole in top of block but it started. The big end of rod was still on crank so we pluged the holes the best we could with rags pushed it up to the line with a quwad and started her and did its pass was smoky and had 0 oil preshure but made it thru with a little help from NOS. And lined it up and did a 4rth pass no oil no coolant made a good time even broken 7.66 even loaded it on trailer and of on its own power. I was absolutly amazed that it ran with that mutch damage on 3 and was worth the effert to break it loose I was able to get my points for season total. Anyway back to the engine drawing board !
Posted 07 August 2013 - 09:24 AM
still no rods yet if they dont make it in time will be the death of anuther 2.51 or we could just turn down the NOS but what fun whould that be
Posted 08 August 2013 - 09:33 AM
Was watching the motor run with a 6 inch by 3 inch hole in the top is kinda neat can see the crank and rods going round well whats left of rod still never seized man theese motors can take a beating 0 oil preshure no coolant no oil still fires right up will try and post a vid of it runing so we can all watch the crank going round
Posted 08 August 2013 - 10:35 AM
you ever get the front tire off the ground taking off in first on the pavement? or revers wheelies?
Edited by apintonut, 08 August 2013 - 10:35 AM.
Posted 13 August 2013 - 09:26 AM
For shure lifts the front tires off the ground my favorot is shift to second while the tires are spinning in first that gets her hooked up quwick. Have done reverse wheelies but kills front diff fast the 4.44 ratio is not as strong as the higher gears so is easy to break. Anyway new engine is in sounds sweet got Hbeam manly rods and cp forged pistons arp head studs the engine we used was a 05 forester engine had a nice bore still runs very even and good pulses out the pipe. Hoping the rod failure is a thing of the past the H beams are twice as thick in the centers as the 2.51 rods shorter stroke mind you droped in ccs but make up for it in strength going to dial the nos back and add more feul plugs had gone lean. And the two rods that were not broke were both bent they had colapsed and had a S to them gess there was some high cly preshures going on on the good side pistons held up no broken ring lands.
Posted 14 August 2013 - 10:09 AM
Ready to go runs very good chillawack bound good luck matt have fun with new engine
Posted 16 August 2013 - 08:55 AM
moved the o2 outa the main exhasut streem think it was pulling back feul when nos extra feul came on to smart bugger. Anyway stays in the green now also droped are nos jets down from 0.26 to a 0.22 hope that helps it hold up
Posted 20 August 2013 - 03:30 PM
Edited by matts87glsedan, 20 August 2013 - 03:45 PM.
Posted 21 August 2013 - 09:38 AM
I must say matt did a mutch better job holding the engine together than me. I find it strange that always breaks #3 piston first every time anyone have imput on thiss Of 6 engine breaks always #3 first a'm thinking its because its the farthest from feul pump and last on feul rail. we are spilting the rails and going to run two pumps and two regs on for each side. Hope this stops the lean burn on #3 This years race season has been a hard learning curve. And Matt did perty good being blindly thrown into a pro race event First time is tough. As he found out I make it look realy easy but have many races under my belt. Also the track was teribble so just geting staged was spinning to get to line
Posted 24 August 2013 - 10:39 AM
so after mutch debate the boys covinced me to switch to NA platform figure the turbo and NOS are killing it so non turbo with more nos. By removing the turbo takes of about 45-60 lbs of engine weight and give way more room around engine also now can putt a ton of nos on it will see how this setup works sounds nasty and instant revs. will it make close to the same power ? no idea will see
Posted 25 August 2013 - 09:55 AM
well its down on power now but we can keep adding more nos and more nos and more nos
Posted 26 August 2013 - 11:58 AM
hey! buy the 3 .047's instead! they match the 026 fuels, and we'll get an available 400 shot ... 400 is a nice number, i like it.
2 stage nos controller is in, and its effing sweet. We can put ridiculous jets in it (see above) , but choose what percentage of the power we want to start and finish at, and choose how fast or slow we want it to ramp up, in .1 second increments. plus other options too, like if we want to fire it by rpm or tps, if we want a delay before ramp up, etc.
I'm willing to bet one Wildcat that it will be superior to the turbo for drag racing once we get it tuned. "how much power would you like sir?" " well, i think i'll start with 210hp over .8 seconds, thank you very much..."
and we havent even got a second stage yet, ahahahahahahaaa!!!
Posted 27 August 2013 - 08:54 AM
so after thinking about it last night, it might not be good to have big jets in it. If we only ever use 75% of our max shot, that means the solenoids will be cycling on and off constantly. having one overheat and stick open or closed would either bog the engine with way to much fuel, or blow it up with too much nos. it would be better to have it ramp up to 100%, so they're just full open and not working. The 210 thats in it right now might be where we should stay (or smaller), then if you still want more after that, it can be brought in with the single sprayer and the second channel.
Posted 27 August 2013 - 08:59 AM
Go big or go home is way cool to have control over system wonder what the max we could throw at it whould be? Anyway runs totaly different than before and seems to get feul properly now
Posted 27 August 2013 - 10:26 AM
well a 400 shot on a v8 would be 50hp per cylinder... i like the idea of 40hp per cylinder, it sounds almost reasonable. we did 32.5hp per cylinder on the road last night.
i was reading a bit about wideband o2, and apparently the more Nos you use the less accurate they are for tuning (so says one guy on the internet). and that plug readings are more reliable. it was nice to see a black plug yesterday.
Posted 30 August 2013 - 09:41 AM
And is loud very loud two 1/12 pipes each side 1 ft out the hood with flapers looks sick ! and makes your ears ring at 6500rpms anyway off to 100 mile for race. Wtch out shark the NA flipen crapper is coming to git ya
Posted 03 September 2013 - 08:31 AM
Well the pit was over my tires and up to my crank pully was brutal worked the buggy hard but was stuck when I started got 25 ft first pass and nos poped 2nd run got thru barly after mutiple nos pops and floging buggy thru only got footage as it stoped and restarted. 3rd pass same and 4rth pass poped so hard blew my air fillter apart and blew mass airflow off had time to put it back on and keep going twice was painfully burryed but still got out 1 ft at time for a 5 min + run but never had to be towed out and drove back every time And are engine is ok runs better now than before race so +1 there The next race should be a normal pitt so turbo back on dial her in and lets go. A'm glad we detuned it and saved the motor as the pitts were hopless when the crapper dosent make full passes the track is very bad. And matt got to see first had a hudge fireball and intake backfire on test run had to use are extinisher to putt it out rough days at the races !
Posted 04 September 2013 - 10:07 AM
Back to turbo agian sounds good ready to tune for next race took 2 hours to change back not to bad at all
Posted 05 September 2013 - 09:35 AM
Now tuning time 1/12 weeks till next race time to set up the deul stage nos 50 to start and 120 at 3/4 mark on track hoping we can get some test passes in before next race and get a bitt better dialed in
Posted 06 September 2013 - 10:08 AM
Feul preshure set nos set water meth online lets go test her out !
0 members, 0 guests, 0 anonymous users