1-3-2-4 Posted July 14, 2013 Share Posted July 14, 2013 I have some heads I got 2 weeks ago and now just started pulling the valves out but I see one seal was not seated and I'm having a hard time trying to get it to come off the valve guide. Quote Link to comment Share on other sites More sharing options...
idosubaru Posted July 15, 2013 Share Posted July 15, 2013 never seen that - you mean if you pull with needle nose pliers it won't come off? yank it without scratching the sealing surface the seal slides onto. Quote Link to comment Share on other sites More sharing options...
Crazyeights Posted July 15, 2013 Share Posted July 15, 2013 (edited) I pried mine off with a forked end door panel tool. Edited July 15, 2013 by Crazyeights Quote Link to comment Share on other sites More sharing options...
1-3-2-4 Posted July 20, 2013 Author Share Posted July 20, 2013 never seen that - you mean if you pull with needle nose pliers it won't come off? yank it without scratching the sealing surface the seal slides onto. I ended up doing this, it was pretty easy but it was better after I soaked the heads. Quote Link to comment Share on other sites More sharing options...
ShawnW Posted July 22, 2013 Share Posted July 22, 2013 Best way? This tool. http://www.jbtoolsales.com/schley-products-92350-valve-stem-seal-removal-pliers-narrow-access/?gclid=CMa5g4zHw7gCFcNcMgodwzUAxQ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.