So the Brat is almost road-going and I am dying to get her out. I am currently only stumped by two things. One being the carb, which I have asked about in the 80's forum and the other being the clutch.
New clutch disc, pilot, throwout, pressure plate and throwout return springs.
Everything is back together and there is no clutch engagement at all? The pedal goes all the way to the floor with nothing?
I checked the fork and it is not loose or of the pivot. The return springs are working as it pulls the bearing back out. I can even move the fork on my own and there is resistance.
So what am I missing? There is a ton of slack and the adjuster is almost all of the way out. I do have a new clutch cable but have not put that in yet.
What am I missing?