Chasing some advice on a planned upcoming conversion.
I'm looking at doing an engine swap and want advice on what works best.
For price/performance would you go an ej20 turbo, ej22 or ej25.
I think i like the idea of the ej20 turbo. Running a manual gearbox all wheel drive.
I've read so much on the various forums and just cant decide now!
What do you guys recommend? Any help would be great.
Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
EJ Engine to Brumby/Brat conversion advice
Posted 15 September 2013 - 02:25 AM
Posted 15 September 2013 - 04:51 AM
The EJ20 turbo will need the chassis rails cut and modified for the
motor to fit. the early EJ18, EJ20, EJ22 and EJ25 single cam motors do
not need this modification done. You will need to make a crossmember to
suit the AWD gearbox and a tailshaft. A high pressure fuel pump,
upgraded fuel lines and a surge tank are required for the fuel side of
things. Finally you will need a cut down harness and the ECU to run the
It is well worth it
ps sound familiar http://www.ausubaru....ead.php?t=24110
Posted 15 September 2013 - 11:56 AM
Do you want a good daily driver or a race car?
I would go for an EJ22 for a DD......maybe a SOHC 2.5 or EJ22 heads on a phase II 2.5 (frankie)
The EJ20g for a "race" car. WOuld not want to drive this everyday. Mostly because turbo'd DD's suck gas and need too much maintainance and have limited lifespan vs. N/A
An STI EJ257 would be an airplane without wings.
Along with what toonga mentioned above, you will need some hybrid axles with 25 spline inner cups...OR open the gear box and put 23 spine axle stubs into the front diff.
FWIW, you don't neeed a surge tank. Espescially if you go with an N/A motor. Just gonna want to keep the fuel level above 1/3 of a tank if you are wheeling or hard cornering.
My lifted EA81 wagon with EJ22 won't stall unless below 1/4 tank and then only when VERY off center/tilted.....espescially if the right side is higher side.
Posted 15 September 2013 - 04:45 PM
It will be an in between car. I have a work car so it won't be a daily driver. So it will be more of a fun car. Trips on the weekend, cruising around town. Just a bit of fun. But something you could go for a drive down the coast for the day and not have any dramas.
Now I can't decide. Lol. Problem is I can't imagine the power in either situation. So don't know which I'd prefer
Posted 16 September 2013 - 07:28 AM
Also have a couple of questions...
- Is there a specific year range, or subaru model i should try and get the motor/gearbox from?
- Can i get power steering, cruise, aircon going on this conversion?
Any info would be great. Looking forward to getting started!
Posted 16 September 2013 - 12:44 PM
here is some questions for you:
What is your experience dealing with engine swaps,wiring harnesses and the like?You asking this so I assume you have never done this sort of stuff before or lack the skills to do it.Just swapping in a non turbo phase one EJ22 has its share of problems and it will documented. Adding a turbo,its oil and coolant lines, and all other related parts is a nightmare for someone asking how to do this stuff.Not to mention the more complicated wiring and engine management.
A better option might be be to swap in a normal EJ22 and see how you fair.
I personally have done several swaps to where I don't think much of installing a EJ22 into something.Heck I am so comfortable with the swap that I am even going to put that engine into an 83 mazda RX7.
So if I wanted to do that swap it wouldn't start with "how do I this", it would start with pics of the donor car,then end with either the engine running or not then I would ask questions.
Asking question at the very beginning of a very large and very expensive project shows you lack either the skills or understanding to see it through. Ive heard of a few EJ20g and EJ257 swaps and all were done by people very knowledgeable in subarus. Starting right off the bat with a EJ20g or EJ257 swap is asking for trouble.A CEL on a non turbo engine isn't normally a bad thing, on a turbo it usually means $$$$$ because when things go wrong with turbos they go wrong in a big way.
a misfire on a non turbo means maybe a bit rough running,a misfire on a turbo engine may end up with a hole in a piston.
Edited by Uberoo, 16 September 2013 - 12:47 PM.
Posted 16 September 2013 - 05:34 PM
Well, you make many good points in your comments.
I havent done an engine swap before, havent worked with turbos, etc etc.
I also will never learn any of this unless I have a go.
The reason I asked questions at the start of a big project is to find out any major dramas, problems, anything that i need to be particularly cautious of while doing this project. There are many people around these forums that have done this before, wouldn't I be better to ask some questions first before hitting the problem?
I appreciate your concern, Unfortunately in life if we don't have a go, we will never learn.
You make a few good points in your post like about misfiring on a turbo etc.. Thats very handy. It lets me know once i get the swap done, ill get a mechanic to look over it and make sure its all fine, i'll get an autoelec to do the wiring for me etc etc.
Just trying to have a go and learn in the process
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users