Jump to content
Ultimate Subaru Message Board

3.545 x 4.11 x 1.59 x 2 = 46.33


Gloyale
 Share

Recommended Posts

46.33 Crawl ratio??  Is that Too low???

 

I mean am I gonna use 1st Lo/Lo ???

 

Perhaps I should use 3.7 diffs? Hmm....That would only be 41.7

 

IDK.....Just looking for thoughts from those that have added t-cases or otherwise adjusted gearing.

 

Scott....you made that crazy sideways engine thing with the final drive outputs feeding the front and rear diffs?

 

Was that a D/R trans? and how was the gearing in that???  3.545 x 3.9 x 1.59 x 3.9= 85.73!!! 

 

 

The reason I ask....Is I'm considering an EJ trans with a welded center to feed into the transfercase....Stronger EJ clutch options.

 

That would be 3.545 x 2 x 4.11 = 29.13   Hmm..... maybe not low enough.  Maybe 4.44 diffs = 31.48??? hmm....that sounds good.  Stock EA gearing is 21.98  so that could be a good jump.

 

Thoughts.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...