My Hitachi'd ea82 is not making the fuel pump run when I turn the key. Started after I rebuilt the carb, I thought just needed a good prime, and I can make it start and run if I crank & pump enough to make it siphon, it runs, spitting gas. Then I realized the fuel pump wasn't whirring.
So I checked all the connections, don't seem to have power to the pump -but was unsure about how the relay works, so I went ahead and swapped in a fuel pump -(but did not plumb it yet) turn the key -still nothing. Pulled out the two 4-wire relays above the fuse box (is one of these fp?) and swapped them, but they both click. Still no pump.
Is there some other sensor to tell the fuel pump to go? What am i missing?