Steve W. Posted December 9, 2013 Share Posted December 9, 2013 Hi. Folks. Say, I'm workin' on my 88 GL 10T wagon, I did the five lug swap several years ago. I'm runnin' late model Legy twin pot calipers and rotors in the front, and have most every thing gathered to switch to Legacy in the rear. I figured this would be a good time to change to braided lines. Does anyone know of an affordable source for these lines? Don't have much cash to throw at it, but seems foolish not to, with all the other mods. Thanks much, Steve. Quote Link to comment Share on other sites More sharing options...
Turbone Posted December 9, 2013 Share Posted December 9, 2013 Theres a few on line specialty shops out there, but you may pay a premium price. I would try ebay. Quote Link to comment Share on other sites More sharing options...
Steve W. Posted December 14, 2013 Author Share Posted December 14, 2013 Any info. on what years and models of cars would I look for to fit my GL? S. Quote Link to comment Share on other sites More sharing options...
presslab Posted December 14, 2013 Share Posted December 14, 2013 I bought a set of Goodridge hoses for a 02 WRX on eBay, and they fit with a few small mods. This is with the stock calipers. If I remember the rear fitting is different but it worked fine with a banjo bolt. Sorry it's been a while... Quote Link to comment Share on other sites More sharing options...
Steve W. Posted December 15, 2013 Author Share Posted December 15, 2013 Thanks presslab, I've been shopping around, Summit has some pretty affordable. S. Quote Link to comment Share on other sites More sharing options...
Caboobaroo Posted December 17, 2013 Share Posted December 17, 2013 2000 to 2009 Legacy and Outback use a similar 2 pieces rear brake line setup like our cars do. You can get a set of stainless lines for a 2005 LGT and they should work with the setup you're wanting to run. I have the 2004 WRX rear brakes with 2000 Outback flex lines to go from the hard line mounted on the trailing arm to the caliper. No modifications required. Quote Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted January 20, 2014 Share Posted January 20, 2014 Not sure where yur located but there are shops that can use your fittings or new ones and custom make a set for you to bolt on. Price was good and quality was exceptional... the hose guy in tenino for instance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.