Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
EA82 swap EJ22 fuel system question.
Posted 27 January 2014 - 06:55 PM
ea82 carb motor was pull out and plan to swap to ej22 motor in loyal.
Need to change fuel pump w fuel injection than fuel pump carb?
Just need to know as soon. Thanks.
Posted 27 January 2014 - 10:19 PM
Posted 28 January 2014 - 12:13 AM
I had to upgrade the rubber sections of fuel line to F/I grade too.
Posted 28 January 2014 - 01:33 AM
Any more advise for fuel system issuse?
Posted 28 January 2014 - 01:05 PM
Use the Vent line as the return line. Carb return line is too small.
Switch them at the tank.
Posted 28 January 2014 - 01:27 PM
My 86 gl coupe has an ej22, using an xt6 fuel pump. The car was originally a carb 1.8, using the same lines, although i had to make some adapter fittings between the body and the engine.
The fuel pump is connected directly to the car, and the ej harness is spliced into the bdy harness to run the fuel pump. I made my connection form the harness fuel pump relay to the body harness under the carpet near the door sill on the passenger side.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users