espey_16 Posted March 27, 2014 Share Posted March 27, 2014 My buddy found a 3.7 LSD, and I have an open 3.9 rear to put the guts in. I read the LSD swap thread in the off road mods section, but there's no pics of the process. I'm mainly looking for a pic of the material I need to remove from the 3.9 rear to make room for the LSD carrier, and see if there's enough space to get a cut off wheel or angle grinder in there. Quote Link to comment Share on other sites More sharing options...
monstaru Posted March 27, 2014 Share Posted March 27, 2014 Yew rook n wong prace glasshoppa ..(yes I know, completely offensive, but don't worry I don't hate anyone) http://www.indysworld.com/80s/general/USRM/mick-usrm/lsd-swap/lsdswap.html It is in the Old USRM, then linked by Mick. cheers Quote Link to comment Share on other sites More sharing options...
espey_16 Posted March 27, 2014 Author Share Posted March 27, 2014 Awesome, thank you very much. It takes way more than that to offend me Quote Link to comment Share on other sites More sharing options...
monstaru Posted March 27, 2014 Share Posted March 27, 2014 (edited) I was more talking to the general public who might read it. lol cheers Edited March 27, 2014 by monstaru Quote Link to comment Share on other sites More sharing options...
Numbchux Posted March 28, 2014 Share Posted March 28, 2014 I also posted a thread pic in the "new" USRM about 8 years ago.....check it out. http://www.ultimatesubaru.org/forum/topic/63821-pics-of-lsd-conversion/ Quote Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted April 5, 2014 Share Posted April 5, 2014 my bad on a thread jack but is where do you get the parts to rebuild the lsd third member... i cannot find the new stuff for the life of me. i have the stuff for the swap but my lsd is to tired to even bother swapping Quote Link to comment Share on other sites More sharing options...
Gloyale Posted April 5, 2014 Share Posted April 5, 2014 (edited) I've got part #s here......not sure if you can still get them from Subaru though. 48587 7000 is the Friction Plate 48590 7001 is friction Disk......1.65 mm 48590 7002 is friction Disk......1.90 mm 48593 7001 is thrust washer 1.60mm 7002 is thrust washer 1.75mm 7003 _____________ 1.85mm 7220 40000 is the Full LSD assembly. Edited April 5, 2014 by Gloyale Quote Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted April 8, 2014 Share Posted April 8, 2014 Wow!!! Gold mine!! Thanks gloyale Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.