Jump to content
Ultimate Subaru Message Board

Recommended Posts

My cheesy CD service manual does not list torque specs for various repairs.  Does anyone have handy the torque specs for:

 

  1. tensioner              18.1 +/- 1.4 ft-lbs
  2. idlers                     28.9 +/- 2.9 ft-lbs
  3. water pump          7.2 +2.9/-0 ft-lbs
  4. oil pump                4.7 ft-lbs
  5. crank pully            79.6 +7.2 /-3.6 ft-lbs (although many tighten the crap out of this...more like 150 ft-lbs)
  6. cam sprockets     57.9 +/- 3.6 ft-lbs
  7. cam cap bolts        top bolt 12  ft-lbs, bottom two bolts 7 ft-lbs)

 

thanks-

Link to comment
Share on other sites

Tighten the Crank pulley bolt to at least 140 ft lbs.

 

Many times the torque specs are listed in the exploded views, but not in the repair sections.

 

All of the torque specs will be the same for a Legacy. you can get a Legacy Factory service manual here: http://www.main.experiencetherave.com/subaru_manual_scans/

Edited by Fairtax4me
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...