comatosellama Posted August 14, 2014 Share Posted August 14, 2014 I was thinking about redrilling my hubs to 4x110. I have a couple extra pairs of atv wheels, some are 4x156 and some are 4x110. Do you guys think it'd be anything near safe to try and do? I don't know how I'd go about doing it, I'm assuming in between the original studs? I'm a cheapo, I know, but this is a trail only rig so there isn't a dot worry or a rims blowing up worry, and I want to be able to use atv tires, I mean imagine having some black mamba tires on a brat! Quote Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted August 14, 2014 Share Posted August 14, 2014 Ive been redrilling hubs to 4 x 100, works out fine http://www.sjrlift.com/index.php/catalog/misc/hub-4-x-4-5-in-114-3mm-51-detail Quote Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted August 14, 2014 Share Posted August 14, 2014 Why change a Rare-to-find 4X140 Pattern to another rare-to-find- 4X110? In my case, I redrilled the Hubs since year 1996, on my Subaru "BumbleBeast" from 4X140, to a more commercially available, 4X114.3 Pattern, and I run it like that since then, without issues; and that pattern gives you plenty of Rims to choose from. More info on my "BumbleBeast" Thread, clicking on my Signature. Kind Regards. Quote Link to comment Share on other sites More sharing options...
comatosellama Posted August 14, 2014 Author Share Posted August 14, 2014 Why change a Rare-to-find 4X140 Pattern to another rare-to-find- 4X110? In my case, I redrilled the Hubs since year 1996, on my Subaru "BumbleBeast" from 4X140, to a more commercially available, 4X114.3 Pattern, and I run it like that since then, without issues; and that pattern gives you plenty of Rims to choose from. More info on my "BumbleBeast" Thread, clicking on my Signature. Kind Regards. I'm only using it for offroad, and I have a set of 4x110 rims and tires for my yamaha wolvie on hand, I overpaid for my brat in the first place, so being frugal is key. It'll never see anything besides 4lo and 1st, so I don't really have to worry about the saftey concerns of using atv/rzr stuff. http://www.ultimatesubaru.org/forum/topic/30498-why-wont-atv-rimstires-work/ post #4/#8 Just gotta run them at real high pressure Quote Link to comment Share on other sites More sharing options...
LucasP Posted August 14, 2014 Share Posted August 14, 2014 I never redrilled hubs to go down to 4x110, but I did buy blank atv rims while I worked at motosuperstore and ran atv rims and tires on my old 83 wagon for 2 years without any problems. I never took them on the freeway but I drove around on them everyday. I jumped that thing and wheeled it really hard without any issues. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.