ltkenbo Posted September 12, 2014 Share Posted September 12, 2014 Hey everyone, I'm currently trying to replace the radiator on my 2006 B9 Tribeca and so I'm trying to get the old one out. I'm at the step where I need to remove the front bumper in order to get to the bolts that hold the AC condensor to the radiator.So I was following the service manual but was confused about how to actually get it off. I removed the 7 or so clips on the bottom of the bumper underneath, the 3 on top, the upper cover, and the 2 in the wheel wells. I also disconnected the foglamps. The step after that mentions something about a notch in the bumper face and I don't understand what the picture is showing exactly. I read somewhere else I should just be able to pull it starting at a corner but it seems like it's still attached to something. Wish I could understand the service manual picture, help on this would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
avk Posted October 8, 2014 Share Posted October 8, 2014 Do you still need help with the procedure? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.