Jump to content
Ultimate Subaru Message Board

95 legacy motor into a 98 legacy


Recommended Posts

The 95 motor will mechanically and electrically drop directly into the 98. You might have to change one vacuum solenoid for the evap line, but it's a fairly easy swap. I don't know if the 98 has EGR because I don't know what enigne or model it is and I don't have a picture.

Link to comment
Share on other sites

put the 98 intake manifold on the 95 block and heads and you are done .

install it, plug it in and drive away.

 

the only differences are on the intake manifold.

unplug it and unbolt it from the 98 and put it on the 95,

install the 95 in the 98 car

and DRIVE AWAY.

 

any questions?

 

it does not get much easier than this.

Link to comment
Share on other sites

PS:

you will also need the 95 exhaust y-pipe.

the 95 has dual port heads and rthge 98 has single port heads.

 

you can use ANY dual port y-pipe 90 - 99, they are all the same .

and can be found on

legacy ej22 cars 92 - 95

impreza ej22 cars 95 only

impreza ej18 cars 93 - 97

legacy, forester and impreza? ej25 cars 96 - 99.

 

the ej22 cars 96 - 99 are single port just like your 98.

those will not work.

 

good luck.

Edited by johnceggleston
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...