subykyleej22 Posted October 7, 2014 Share Posted October 7, 2014 hey guys i also have a ej22 with single port exhaust and was wondering if any of you would know where i could find the part number for those cylinder heads. i cant seem to find them / it anywhere. I picked up a 98 legacy with a 96 ej22 with bent valves for dirt cheep and i am looking to hunt down some good remanufactured and or new cylinder heads depending on the cost. What do you think would be my best value ? Quote Link to comment Share on other sites More sharing options...
idosubaru Posted October 7, 2014 Share Posted October 7, 2014 easiest and most practical solution is to install a set of used EJ22 heads - any Legacy or Impreza 1996-1998 EJ22 heads will be a direct swap. www.car-part.com alternately you can have a shop simply replace the valves and do a valve job. that will be $200 - $500 depending what all they do. generally don't need a part number for the heads, they'd be killer expensive from subaru. Quote Link to comment Share on other sites More sharing options...
AdventureSubaru Posted October 7, 2014 Share Posted October 7, 2014 if it's a 96, your valves shouldn't be bent. 96 engines are non interference. Did the timing belt go? If so, just realign with a new timing belt and drive it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.