Subarocket Posted November 7, 2014 Share Posted November 7, 2014 Winter is coming and I need to lift my car so I can fit my new tires in. I have been unable to find an Outback to get the tranny and engine crossmember spacers for a drop.I believe they are from a 96-99 Outback and are 1.1/4". Does anyone have some drawings or specs so I can have some made. I don't know everything that I am looking for on this so I appreciate the help.Thanks,Brian Quote Link to comment Share on other sites More sharing options...
AdventureSubaru Posted November 7, 2014 Share Posted November 7, 2014 Did you already do the suspension lift? I've heard 1 inch on the outback spacers. If you need exact, I can go measure since I have one sitting in the driveway. It's not rocket science for the spacers. Get some steel in the thickness you want and drill holes to match the subframe. Look at some pictures of EA82 lift kits if you don't have a picture in your head. Quote Link to comment Share on other sites More sharing options...
Prwa101 Posted November 7, 2014 Share Posted November 7, 2014 Take a look at my kits, it's pretty easy. What's your make and model? https://m.facebook.com/profile.php?id=1458812977704910&ref=bookmark 1 Quote Link to comment Share on other sites More sharing options...
Subarocket Posted November 8, 2014 Author Share Posted November 8, 2014 It's a 92 Loyale wagon p/b 4x4. The lift is not in yet. It's a boss 2". I honestly don't know exactly which spacers need to be swapped exactly. I'd love to see pictures. Prwa, the only pic I could see on your fb page was a box full of lift parts. Could you send me a link to the one picture you had in mind. Would you sell just the subframe drop? Does that include a spacer for the rear diff? Thank for the help. Please forgive my lack of knowledge. Quote Link to comment Share on other sites More sharing options...
Prwa101 Posted November 8, 2014 Share Posted November 8, 2014 Nice man! thouse are hard to come by! killer kits i strive to be a good a BOSS.... With my subframe drops i drop only the front engine crossmember and transmission mounts 1.5". Theres no need to drop the rear, ive seen people run 4" lift in the rear without dropping anything. Even 3" of lift dosnt kill them right away. Its no problem, yeah i could sell just the spacers, 135$ shipped with all hardware heres my photos and kits http://www.ultimatesubaru.org/forum/topic/148582-anderson-design-fabrication/ Quote Link to comment Share on other sites More sharing options...
wagonist Posted November 9, 2014 Share Posted November 9, 2014 Don't be too worried about the engine/tranny spacers, make sure you've got the steering shaft extension first cos not just anybody can make those. Seems that would need to come from the Outback anyways. Quote Link to comment Share on other sites More sharing options...
Prwa101 Posted November 9, 2014 Share Posted November 9, 2014 With the 1.5" drop you can use a 90-94 legeacey stearing saft. Its already lengthend for you just grad one at a pnp or scrap yard fast and easy. PRWA 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.