Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
piston sizing issue
Posted 17 May 2004 - 02:20 AM
on the case I am going to use I have 3 "B" stamps and one "C" stamp.
I dont have acess to a mic to measure the differnce in size yet.
does any one know how much the sizing will be off?
I sliped the piston in both the B and C holes and cannot see or feel much differance.
I know I need to do some actual measurements.
this is on an EA82T motor.
Posted 17 May 2004 - 08:04 PM
guess all the brain power has drifted away from here.
Posted 17 May 2004 - 08:23 PM
Posted 17 May 2004 - 09:09 PM
Put a piston in a hole. Use a feeler gauge to measure fit. Subaru allows .003 clearance. If it's tight or loose in that cylinder, try fitting into a different one...chances are it will fit.
Posted 17 May 2004 - 11:27 PM
measured at the skirt of the piston I would assume?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users