Jarred87GL Posted January 13, 2015 Share Posted January 13, 2015 Cant seem to find a thread with detailed ways to get a 4 inch lift. am not spending 300 dollars on a lift kit Im 17 and want to create something amazing. i have 29x10.5x15 SS and just rebuilt a ea82 turbo for my 87 gl wagon. Point me in the right direction subie wizards Link to comment Share on other sites More sharing options...
dannycisneros Posted January 13, 2015 Share Posted January 13, 2015 Look up Prwa101. Hes a member on here. He does the Anderson Design and Fabrication, "ADF" lifts. Im sure he can help you out! Link to comment Share on other sites More sharing options...
ferp420 Posted January 13, 2015 Share Posted January 13, 2015 you need about a foot of 4" pipe cut the ends at between 17º and 18º then weld a plate top and bottom to bolt your struts to drop your engin crossmember down using 3" square tube and cut a few small pieces of square tube to drop the radias rod monts and trans crossmeber then theres the stering coupler that needs to be replaced or lengthend and um shifter linkages need to be adjusted thats for the front the rear i used some flat stock bent in a kinda z shape for the first 2" and then i installed aset of kybs for a 2wd modle wagon for about another 1.5" i dident drop the rear diff or k bar but it should be droped as well some squre blocks should work for that to thats basicly my set up i basicly looked at what everyone else has done and copyed it with basic mechanicle skills its all relitivly easy to do there is alot of little stuff your gona run in to but thats the fun part read search learn fab ask questions if need be install wheel enjoy Link to comment Share on other sites More sharing options...
ezapar Posted January 13, 2015 Share Posted January 13, 2015 Then you should search this forum for diagrams and photos and descriptions. Or find someone in your area with one and get under his car and look at it. We can't help you find a kit that you don't have to buy. Link to comment Share on other sites More sharing options...
Recommended Posts