waynes Posted January 23, 2015 Share Posted January 23, 2015 Hi, new to this site but I have looked for answers to my problem here and sort of found an answer but not really sure.I have a 1996 legacy postal 2.2 and it has no spark on just the number one plug this was confirmed by jumping the wire to ground is it possible that the ignitor is bad or would it be the spark sensor on the crank or could it be that part of the coil? Thanks Wayne. Quote Link to comment Share on other sites More sharing options...
TOONGA Posted January 23, 2015 Share Posted January 23, 2015 If your ignitor, crank angle sensor or cam angle sensor were faulty there would be little chance of your car starting. you have a 4 pack coil on top of your inlet manifold, this system uses the wasted spark system, 2 coils firing at once. I would check the resistance of your wires especially number one wire. you might try swapping the lead with another on the engine to see if the wire is faulty. TOONGA Quote Link to comment Share on other sites More sharing options...
waynes Posted January 23, 2015 Author Share Posted January 23, 2015 Hi I tried that and the wire fired on the other coil just fine,I'm thinking I have a bad coil since the other three coils work just fine,does this sound to be true? Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted January 23, 2015 Share Posted January 23, 2015 Only way to cause no spark to one cylinder is a problem with in the coil. Replace the coil and you should be good. Quote Link to comment Share on other sites More sharing options...
keith3267 Posted January 23, 2015 Share Posted January 23, 2015 (edited) Look for damage to the primary wires to the coil before you replace it, but in all likelihood, it will be the coil itself. Look at the coil at night in the dark. Often the problem with a coil is that the housing cracks and the coil arcs to the nearest ground. It is a lot more visible at night. Edited January 23, 2015 by keith3267 Quote Link to comment Share on other sites More sharing options...
waynes Posted January 23, 2015 Author Share Posted January 23, 2015 Thanks guys ! Quote Link to comment Share on other sites More sharing options...
waynes Posted January 24, 2015 Author Share Posted January 24, 2015 One cylinder was bad on the coil thanks!!!! Quote Link to comment Share on other sites More sharing options...
TOONGA Posted January 24, 2015 Share Posted January 24, 2015 Glad it was an easy fix. TOONGA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.