Jump to content
Ultimate Subaru Message Board

Recommended Posts

97 Legacy Lsi 2.5l auto

 

On very humid days ( like after a warm night when it rains) the car runs very rough for a little while. The first time this happened I had the wires and plugs done. Now it just happened again and this time it kicked a CEL. At first it was flashing then it went steady then the next day it turned off. Other than going in and getting it pulled what could cause this problem.

 

And what does a flashing CEL means vs. a steady one?

 

thanx very much

Link to comment
Share on other sites

I'm thinking you might want to start it up on one of those humid mornings early (before the sum comes up) and have a look under the hood to check for visible arcing or coronas on any of the ignition secondary components including the coil pack. Sometimes you can hear the snapping noise of an arcing problem.

 

The flashing CEL means that the ECU is logging a code that is read-able for information as to where to begin searching for the problem.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...