Whatever Posted February 20, 2015 Share Posted February 20, 2015 So I can't get the pin off that goes through the end of the clutch cable and the clutch pedal. I can't figure out how to pull the pedal either. Please help me. Quote Link to comment Share on other sites More sharing options...
idosubaru Posted February 20, 2015 Share Posted February 20, 2015 from my XT experience: take a picture or make a careful drawing before you do. on the XT's i remember it wasn't entirely clear/obvious how it goes back together. get good lighting and stand on your head in the drivers side footwell to see what's going on. lol it's simple, but can't see down there. Quote Link to comment Share on other sites More sharing options...
Twitch de la Brat Posted February 20, 2015 Share Posted February 20, 2015 There's clip on the end of the shaft that the pedal rides on. You'll need some really good pliers to get it off. There are some plastic bushings that ride on the shaft, make sure you don't lose those when you pull the pedal off. Once the pedal is off, you should have enough movement and slack to get the end of the cable off and out. It's the same attachment style as your throttle cable. Rotate until the cable slips free and you can finagle the end out. Twitch 1 Quote Link to comment Share on other sites More sharing options...
Sapper 157 Posted February 20, 2015 Share Posted February 20, 2015 (edited) There should be a little lock washer thingy that goes over the bolt that holds on the pedal and cable. you can get the little bugger off if you use a flat head driver or some good needle nose pliers. after that, the pedal should just slip off. Edited February 20, 2015 by Sapper 157 Quote Link to comment Share on other sites More sharing options...
Whatever Posted February 21, 2015 Author Share Posted February 21, 2015 (edited) On mine there's a clevis pin that goes through but on the end its too wide to fit through the hole when i try to pull it and if I try to push it back it jams against metal. OK I got what you're saying twitch, you have to remove the clip that attaches the pedal to the shaft first then the clevis pin can come out. Got it. Thanks. Edited February 21, 2015 by Whatever 1 Quote Link to comment Share on other sites More sharing options...
Sapper 157 Posted February 22, 2015 Share Posted February 22, 2015 (edited) Okay here's what you do...First, remove the big wash locker thingy (sorry, forgot technical term) that keeps the pedal from falling off the brass bar. the blue arrow is pointing to it in the pic..Now you should have enough wiggle room to get that smaller clevis pin (just to the left of the lock washer in the pic) off of the pedal/cable, because you will be able to almost completely take off the clutch pedal (when you do get the clevis pin off, you WILL be able to completely take off the pedal). Does any of this help? Edited March 5, 2015 by Sapper 157 4 Quote Link to comment Share on other sites More sharing options...
Sapper 157 Posted February 23, 2015 Share Posted February 23, 2015 Oh crud, I just read the last part of your last message, sorry for the unneeded post Quote Link to comment Share on other sites More sharing options...
BEECHBM69 Posted March 4, 2015 Share Posted March 4, 2015 Oh crud, I just read the last part of your last message, sorry for the unneeded post Actually, the picture is awesome, so thank you :-) Dan 1 Quote Link to comment Share on other sites More sharing options...
jono Posted March 4, 2015 Share Posted March 4, 2015 circlip ? brass bar ?? we only got a mild steel or maybe tool steel axle pivot bar for the pedals !! Quote Link to comment Share on other sites More sharing options...
Sapper 157 Posted March 5, 2015 Share Posted March 5, 2015 circlip ? brass bar ?? we only got a mild steel or maybe tool steel axle pivot bar for the pedals !! haha, yeah well the pivot bar has a brass-looking hue to it. Plus im no metal expert so to your average joe it kinda has the same appearance as brass. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.