Jump to content
Ultimate Subaru Message Board

What's this part?


Recommended Posts

Stop light check relay.

 

It's a dual coil relay wired into both brake light circuits.

If both bulbs are good, both coils are energized.

If one bulb burns out, the good side of the circuit causes the relay to move, making the contact for the "Stop Lamp" light on the dash cluster to light.

  • Like 1
Link to comment
Share on other sites

Stop light check relay.

 

It's a dual coil relay wired into both brake light circuits.

If both bulbs are good, both coils are energized.

If one bulb burns out, the good side of the circuit causes the relay to move, making the contact for the "Stop Lamp" light on the dash cluster to light.

Thanks! Now I know.

  • Like 1
Link to comment
Share on other sites

Never experienced it, but I heard a rumor that if both lights burn out then the light will not illuminate either.  It only comes on with ONE light burned out.

This is true and is explained in the owner's manual.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...