lemonman Posted May 17, 2015 Share Posted May 17, 2015 Yesterday I left my 1998 Subaru Legacy Outback EJ25 engine outside while it was raining. The intake manifold was removed at the time. The air intakes were completely full of water except one, my friend and I tipped the whole thing upside down to drain most of the water, I then sprayed copious amounts of WD40 into each intake. 3 intakes had standing WD40 in them and the other seemed to drain past the valves or something. Now, what is my next step? I was not planning on removing the heads, but that might be a good idea to try and dry things out? Quote Link to comment Share on other sites More sharing options...
ocei77 Posted May 17, 2015 Share Posted May 17, 2015 Use some type of suction in the spark plug hole, to get as much as you can out. A hair dryer should get the rest. O. Quote Link to comment Share on other sites More sharing options...
montana tom Posted May 17, 2015 Share Posted May 17, 2015 Pull the plugs and turn over the motor 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.