Jump to content
Ultimate Subaru Message Board

Build a Loyale brat


Recommended Posts

I plan to build a Brat wannabee out of my 1993 Loyale wagon. The plan is to cut the roof off the back half  and the top off the hatch in the back and weld a second hatch in place to make the rear wall and back window. It will look hopefully like this when done. My Question is, has anyone here done this and what problems may I incur.

subeet_zpse3e1dcd2.jpg

Link to comment
Share on other sites

If you take your time and measure twice, or even 4 times and cut once... you should be fine.... just be patient and don't cook through the metal when welding it back together.  Make sure to thoroughly check for wiring/hoses before cutting (for example for the dome light, rear wiper washer, etc) 

Link to comment
Share on other sites

I would make sure to build something underneath to hold the car together, I made a glorified go kart for messing around on my property out a 91 loyale wagon and after we cut the roof off the whole car would flex and put a lot of strain on the drive shaft.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...