Rooster2 Posted July 11, 2015 Share Posted July 11, 2015 Bought a new wiper transmission, but can't figure out how to pull the plastic ball and socket connectors (bushing assembly) apart to disassemble. I tried to wedge the assembly apart with a pry bar without success. I finally gave up before I got too frustrated, and would break something. Looking ahead, how do I assemble the socket onto the ball at the end of the wiper motor. I don't see much room to get my hands in the cramped space to do anything. With almost daily rain here in the midwest these days, going without wipers is a real pita. Rain-X only works well if going 50 mph+. Thanks for any advise....................Rooster2 Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted July 11, 2015 Share Posted July 11, 2015 Pry bar or a big screwdriver. They're just really tight. Usually takes a pair of channel lock pliers to get them put back together. 1 Quote Link to comment Share on other sites More sharing options...
Rooster2 Posted July 11, 2015 Author Share Posted July 11, 2015 Pry bar or a big screwdriver. They're just really tight. Usually takes a pair of channel lock pliers to get them put back together. Thanks Fairtax for the advise. I appreciate it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.