Jump to content
Ultimate Subaru Message Board

EA82 Code 55


Recommended Posts

Are you sure its the same code? Im guessing you cleared the codes.

You need to verify the specification code after removing the ground. Make sure there is no way that you are getting ground to pin 33. 

 

5: M/T Federal emissions (wire disconnected)

6: M/T Cali (wire connected)

7: A/T Fed (wire disconnected)

8: A/T Cali (wire connected)

 

Unless the ECM is bad or the Loyale ecms are different, Im unsure of how you can still get this code with pin 33 ungrounded.

Read this post again. Find out what mode your ecm is running. That code doesnt exist on the mpfi chart, and its in exception (cali only) on spfi.

Link to comment
Share on other sites

I chased what I thought was a code 55 in my '88 Wagon.

 

What I finally determined is that it actually is doing the spec code and not a 55 code.

 

I sat in the seat and watched it blink for a few minutes.

5 flashes, short pause, 5 flashes, long pause, then it repeated over and over.

Turns out that the second set of 5 flashes are the same duration as the first set. So that says it's flashing a 5 only, not a 55.

Had me chasing my tail for a bit.

 

Maybe that's what yours is doing.

Link to comment
Share on other sites

I chased what I thought was a code 55 in my '88 Wagon.

 

What I finally determined is that it actually is doing the spec code and not a 55 code.

 

I sat in the seat and watched it blink for a few minutes.

5 flashes, short pause, 5 flashes, long pause, then it repeated over and over.

Turns out that the second set of 5 flashes are the same duration as the first set. So that says it's flashing a 5 only, not a 55.

Had me chasing my tail for a bit.

 

Maybe that's what yours is doing.

This thought totally occurred to me as well, but Im getting the impression hes getting a CEL indicating an active code. But definately worth a mention...

Link to comment
Share on other sites

Definitely have a CEL, definitely 5 long followed by 5 short flashes.  My other Loyale has 5 flashes with no CEL indicating no problems.

 

As mentioned, the car does have some other issues so maybe once they're resolved this problem will sort itself out.

Edited by jetpilotdc10
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...