jread Posted March 14, 2016 Share Posted March 14, 2016 So I'm missing the charcoal canister for my EJ swap. Not sure if I left it in there when I pulled the motor or if it just didn't have one... Either way just wondering if I need one and if I can use the one from my EA82 and where I would plug it in? There is a hose I'm pretty sure is the evap from the gas tank that comes out near the master cylinder from a hardline. Is this correct? Can I just run this straight to the Evap hardline on the EJ intake? Thats the way it looks in the EJ manual. Quote Link to comment Share on other sites More sharing options...
jread Posted March 20, 2016 Author Share Posted March 20, 2016 Anyone have any ideas? Quote Link to comment Share on other sites More sharing options...
TomRhere Posted March 20, 2016 Share Posted March 20, 2016 http://www.ultimatesubaru.org/forum/topic/158145-gas-tank-pressurizing-after-charcoal-cannister-removal-ea82t/ That thread has diagram of the SPFI/Turbo evap canister plumbing. Don't know EJ swap stuff, but you should be able to hook it up to the EJ's purge solenoid. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.