Jump to content
Ultimate Subaru Message Board

Recommended Posts

Here's the story. I hear a squalling bearing as I'm travelling 65mph. I slow to 55, noise stops. One mile later, the engine dies.

Tow home, open timing case, lo and behold, the lower passenger-side cam sprocket is just-- gone! It's shattered into five pieces.

How is this possible?

Link to comment
Share on other sites

Oil starvation.

Squealing was probably the cam eating the bearing journals in the cylinder head.

 

Passenger cylinder head is the last in line to get oil. Either the oil got very low, or something got sucked into the oil passage and caused an obstruction that prevented oil from getting to the head.

  • Like 1
Link to comment
Share on other sites

Oil level was good...

 

current oil level only verifies that failure wasn't caused by low oil since the last oil change. the issue may have been initiated at any time in the history of the vehicle.  As he said - usually it's:

 

1.  prior low oil conditions at any time since leaving the dealer lot.

2.  prior overheating (headgasket) compromising the localized material/lubrication properties at the site of failure.

Link to comment
Share on other sites

some options:

 

1.  used set of heads

2.  EJ22 swap (you don't say but I'm guessing this is a 1998 forester so this would be an easy and great option).  

 

my preference would be to EJ22 swap it. 

used EJ22, new timing kit, spark plugs, wires, valve cover gaskets, reseal separator plate, and water pump and drive it another 100,000 miles...or whatever the equivalent to that is in Hawaii.

then sell your old EJ25 block if the market in Hawaii allows it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...