Jump to content
Ultimate Subaru Message Board

HatchBack Project Idea


Recommended Posts

ok, the only missing ingrediants is a hatchback itself.........

 

i have an ej22 with 4spd auto 2wd trans, and all the wiring for both. suppose i find myself a hatch(or 474 bucks).

 

this project would use the ej trans with the 25 spline doj, and ea82 turbo axles from a full time or turbo model.

 

but nay? the hatch is an ea81?

this project would use the MODIFIED ENGINE CROSSMEMBER from trashwagon 5, which uses ALL ea82 front suspension parts. so this would make the 25 spline ea82 axles work, just like normal ea82 axles have worked in the trashwagon with the dual range and ea82 motor

 

should something like this use the 16 inch 6-lug rim with 205/55, or would a 5-lug swap be more appropriate?

 

anyway, opinions? how would you guys put this together?

Link to comment
Share on other sites

My opinion, drop in the EJ22 NA, bolt on the turbo up and down pipes and turbo with IC. Mate that to the auto. Go with the 5 lug conversion and WRX wheels all around, they are dirt cheap because people take them off to upgrade and it won't fit much else. Drop in a set of low budget coil overs to make it all come together. Then strip out the interior and go ape on weight. You'll have a WRX killer for very little $$.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...