Ghrasshopper Posted July 7, 2016 Share Posted July 7, 2016 I have a gl with an ea81 motor the engine has been rebuilt but I have no idea where all of these vacuum hoses go to. I can't seem to find more information than what's on the underside of the hood which for some reason does not cover every hose. I'm aware that a Webber would be the easier way to go but I can't afford to that right now and I need to get it running. ANY help would be appreciated thank you. Quote Link to comment Share on other sites More sharing options...
Sapper 157 Posted July 8, 2016 Share Posted July 8, 2016 (edited) I will try to get some pics up tomorrow. until then, check out this thread: http://www.ultimatesubaru.org/forum/topic/154295-just-plug-it-taking-some-of-the-mystery-out-of-your-hitachi/?hl=%2Bjust+%2Bplug Edited July 8, 2016 by Sapper 157 Quote Link to comment Share on other sites More sharing options...
soobenthusiast Posted July 8, 2016 Share Posted July 8, 2016 (edited) I went through the same thing last weekend, here's a thread with pics of my current setup. http://www.ultimatesubaru.org/forum/topic/159628-carter-to-hitachi-swapbut-not-yet-running-well/ After trying several combinations of plugs and orifices on my high speed and bowl vent lines, the high end is still a bit erratic and cuts out a bit more than I would like. I was also trying to convert a feedback carb into non-feedback, so it was a tricky setup anyways. The new Hitachi also had some issues with the choke working properly, so my cold starts are also not better... What year is your car? Even the Haynes manual has some very nice vacuum diagrams Edited July 8, 2016 by soobenthusiast Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.