rhys Posted August 6, 2016 Share Posted August 6, 2016 How to get the torx bolts out to replace flywheel Quote Link to comment Share on other sites More sharing options...
rhys Posted August 6, 2016 Author Share Posted August 6, 2016 Have broken two tools trying to get them out Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted August 6, 2016 Share Posted August 6, 2016 Torx bolts? That hold the rear plate on the flywheel? That shouldnt come off, the whole thing is supposed to be replaced as a unit. If you buy a replacement flywheel that doesn't have the rear plate, you have to have the whole thing rebalanced after installing the old plate on the new flywheel. Its cheaper to just have the original flywheel resurfaced. 1 Quote Link to comment Share on other sites More sharing options...
86BRATMAN Posted August 8, 2016 Share Posted August 8, 2016 Having a dual mass flywheel in an 02 Forester I'm going to assume you are in a country other than the US, we didn't get the dual mass setup that uses torx bit bolts until the 05 Legacy GT. That said they're not your standard torx head, they use the torx plus head. The size needed is TP-50. https://www.amazon.com/OTC-TORX-PLUS-Socket-Square/dp/B000O846UI 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.