Jump to content
Ultimate Subaru Message Board

Oil pump rotors


Recommended Posts

Hey guys. I have my oil pump off the car and disassembled. I plan on replacing the o rings, seal and Mickey Mouse gasket but I thought I'd check the rotors. The inner rotor looks to be scored where it fits in the housing. I can feel it with my thumb. Should I replace? And if so where can I find it? I can't locate the part #s.

Link to comment
Share on other sites

techincally speaking i think you measure clearancs and follow the FSM as there are three different variations of rotors (A, B, and C maybe - does yours have a stamped letter on the face?).

get the FSM and see the spec's it calls for?

 

what's the history - why are you disassembling it?

Link to comment
Share on other sites

I do have an FSM. And I have B spec'ed rotors. I see the specs it calls for but I mean the actually rotor is is scored. It feels thinner where it goes into the oil pump housing. I'm rebuilding it because it sat forever and I haven't started it myself. Motor has over 200k and I'm resealing and making it right. Someone has already been in this pump. It didn't have the oring behind the rotors.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...